BIG FOOT GALVANISED TENT POLES

 

BIG FOOT GALVANISED TENT POLES

 

BigFoot® tent poles have a registered designed 32mm foot cap to ensure a more secure base for the pole to sit on. They are made with High-Impact Nylon plastic for greater strength, are UV treated to reduce deterioration and have unique drain holes to allow any water to escape. They are available with T-Nut, Plastic Collar or stainless steel spring button for adjustability which is located at the top of the pole for easy extension. All plastics are UV treated and all steel ttings are Yellow Zinc coated and last 4 times longer than standard Zinc. The spigots are made from UV Treated ABS plastic with a Hi-Tensile 8mm Yellow Zinc plated pin. The tube is Hi-Tensile up to 350Mpa and galvanised inside and out with a minimum gauge of 0.9mm.


 

Item Features

  • Hi-Tensile Galvanised Steel 350Mpa
  • Excellent bend resistance
  • Long lasting Hi-Impact nylon foot cap with drain holes
  • Yellow zinc thumb screw & T-Nut
  • Hi-Tensile 8mm yellow zinc spigot Long lasting
  • Made in Australia




Item Variety

    1. Adjustable T-Nut  
    2. Heavy Duty Adjustable T-Nut  
    3. Adjustable Collar 
    4. Adjustable Tri Pole T-Nut  
    5. Adjustable Swag Pole T-Nut  

     
    6. Adjustable T-Nut with Threaded Spigot  
    7. Adjustable T-Nut with 100mm Long Spigot  
    8. Adjustable T-Nut Spreader Support Pole  
    9. Adjustable T-Nut Ridge Rail Support Pole  

1. Adjustable T-Nut

• A must have pole for any tarp setup
• Large foot design to reduce pole sinking into soft ground



 

2. Heavy Duty Adjustable T-Nut

  • Superior strength
  • Excellent bend resistance
  • Used for heavy duty applications



 

3. Adjustable Collar

  • Quality clamps collars used with stainless locking bolts
  • No damage to inner pole when locking



 

4. Adjustable Tri Pole T-Nut

  • Used to reduce space requirements
  • Great for car boots and bike trailers



 

5. Adjustable Swag Pole T-Nut

  • A neat replacement pole for swags



 

6. Adjustable T-Nut with Threaded Spigot

• Prevent tarp or canvas from lifting up with this pole

Swag Pole T-Nut



 

7. Adjustable T-Nut with 100mm Long Spigot

• Used when extra spigot pin length is needed when multiple
• Recommended to be used with Fly spacers are on top of pole
• Used with traditional ridge rails



 

8. Adjustable T-Nut Spreader Support Pole

• Supports directly to round tubes (22mm or 25mm) poles to give extra support to prevent spreaders from bending



 

9. Adjustable T-Nut Ridge Rail Support Pole

• A must have to support square ridge rails from bending
• U Clip has tie down eyelet holes for additional safety (can be tied to ridge rail)

ADJUSTABLE T-NUT RIDGE RAIL SUPPORT POLE