GALVANISED SPREADER POLES

 

GALVANISED SPREADER POLES

 

All tube is galvanised inside and out. All steel ttings are yellow zinc plated for longer life and all plastic ttings are UV treated against the sun. All nylon Inserts and C-Clips are made of High-Impact Nylon. Please be aware that any spreader rail over 12ft should also have a support pole to prevent bowing in the middle and 100mm spigots used on the end poles.


 

Item Features

  • Hi-Tensile Galvanised Steel 350Mpa.
  • Yellow zinc thumb screw & T-Nut
  • High Impact Nylon Fittings
  • Made in Australia

Item Variety

    1. Adjustable T-Nut with Flat Ends  
    2. Adjustable T-Nut Heavy Duty with Flat Ends  
    3. Adjustable T-Nut with Nylon C-Clips Both Ends  
    4. Adjustable T-Nut Heavy Duty with Nylon C-Clips Both Ends (1.2mm wall)  

     

    5. Adjustable T-Nut with Nylon C-Clip & Flat End  
    6. Adjustable T-Nut with Hook Spigot & Flat End  
    7. Adjustable T-Nut with Bent Spigot & Flat End  

 
 
 
 

1. Adjustable T-Nut with Flat Ends

• Traditional spreader made with quality fittings
• High bend resistance
• Connect from spigot pin to spigot pin



 

2. Adjustable T-Nut Heavy Duty with Flat Ends (1.2mm Wall)

• Heavy gauge tube for superior ex resistance
• Extended sizes available for larger spans
• Support pole recommended



 

3. Adjustable T-Nut with Nylon C-Clips Both Ends

• Connect directly to round tube to round tube (19mm, 22mm or 25mm)
• High bend resistance
• Impact resistant C-Clips used



 

4. Adjustable T-Nut Heavy Duty with Nylon C-Clips Both Ends (1.2mm Wall)

• Heavy gauge tube used for Superior bend resistance
• Extended sizes available for larger spans
• Support pole recommended



 

5. Adjustable T-Nut with Nylon C-Clip & Flat End

• Connect directly to Spigot pin to round tube (19mm, 22mm or 25mm)
• High bend resistance
• Impact resistant C-Clip used



 

6. Adjustable T-Nut with Hook Spigot & Flat End

• Roof Support Pole
• Used to connect spigot pin to drilled hole
• Most commonly used to connect to camper trailers
• Tighter radius bent spigot for better holding



 

7. Adjustable T-Nut with Bent Spigot & Flat End

• Roof Support Pole
• Used to connect spigot pin to drilled hole
• Most commonly used to connect to camper trailers